One of the most commonly used cell phones around the globe is the iPhone. With Apple’s most comprehensive smartphones, no doubt users are satisfied. Those users may get annoyed a while after when the device problems like iPhone Stuck in Boot Loop. The Apple Logo will flash on the screen for a few seconds and suddenly it disappears to be specific. When you open your device, it starts to boot again. The worst fact is you will keep on repeating it and find it stuck in boot loop status.
In this article, we have guided you on how to fix iPhone stuck in boot loop easily. Please do not hesitate to read on if you’re suffering from the problem.
What Caused iPhone Stuck in Boot Loop?
Hardware or software-related issue can either be the reason why iPhone stuck in boot loop. The problem arises from the hardware if you accidentally dropped your phone in the water ever. A restart-looping iPhone is a result of software problems in most cases. From a failure in iOS updates, software malfunction or bad jailbreaking, these problems are usually generated.
- This issue can be caused by flawed jailbreak.
- The update gets stuck halfway (iTunes especially) when the software updates with an unstable connection.
- When you restart the device and it gets locked after iCloud bypass, the iPhone black screen issue also can be caused by it.
First Choice: Use iToolab FixGo to Fix iPhone Stuck in Boot Loop without Data Loss
There are a lot of methods and software are available on the internet to solve this issue. We would recommend you to use iToolab FixGo to repair your device without losing data. As a powerful iOS system recovery software, iToolab FixGo can easily repair all kinds of iPhone stuck issues such as iPhone Stuck in Boot Loop, iphone stuck on preparing update, iPhone stuck on Apple logo, etc. No matter what scenario you are in, FixGo will help you get all the troubles done.
With common and uncommon errors, this tool is designed to help your Apple device. Without stress, it lets you fix your iOS device easily and quickly. To operate FixGo, you don’t have to be tech-literate. This well-structured tool works with both Mac and Windows.
Features:
- 3 easy steps to repair 200+ iOS/iPadOS/tvOS problems.
- Fix all the iOS/iPadOS/tvOS stuck issues without losing data.
- Support all iOS devices and versions including iOS 16 (beta).
- No technical expertise required and super easy for everyone.
Steps to Fix iPhone Stuck on Boot Loop Without Data Loss:
Step 1: At first, install and launch iToolab FixGo. From the main page of the software, select the Standard Mode. Connect the device stuck on boot loop to your computer and to begin the repair process, click on “Fix Now”.
![C:\Users\Admin\Desktop\July\9. Ultimate Guide How to Fix iPhone Stuck on Boot Loop [iOS 16-15 Included]\Images\fix-iphone-stuck-on-boot-loop-1.jpgfix-iphone-stuck-on-boot-loop-1](https://www.techdee.com/wp-content/uploads/2022/10/c-users-admin-desktop-july-9-ultimate-guide-how.jpeg)
Step 2: Install the latest firmware on the device to repair the device. To find the latest firmware, click on the browse and download it.
You can manually import the firmware by clicking “Select” if you had already downloaded the firmware package.
Step 3: You will be able to begin fixing the process once the firmware has been downloaded. FixGo will immediately begin repairing the device after you click on “Repair Now”.
Pros:
- The Standard Mode helps you to fix all iOS device issues with no data loss.
- This program is 100% safe and convenient to use.
- It will help you to save time.
The iToolab FixGo gives a new life to your stuck or unresponsive Apple devices and also it is extremely simple to use. To resolve almost all software issues their devices may have while updating, restoring, powering on, resetting etc. It supports 200+ iOS system issues like iPhone stuck on verifying updates, Boot loop, hello screen, recovery mode, etc. You can save your device without any data loss with this tool. As it is a powerful software with a great number of rich features, it is the best one for you to fix your iPhone.
Free Download for Win ：https://itoolab.com/download/?product=fixgo.exe
Free Download for Mac ：https://itoolab.com/download/?product=fixgo.dmg
Latest Coupon Codes: Buy iToolab FixGo Latest Version at Best Price:
20% Extra discount: LABR8F
Force Restart Your Device to Fix iPhone Boot Loop:
Your iPhone may suffer a software glitch from time to time. Several issues like an iOS/iPadOS bug, a rogue app or an iOS update that didn’t go quite according to plan can cause glitches. When your device is experiencing any software-related issues, a force restart is the first solution you should try. To help repair some of the most common iOS 16 issues on the device, this process is a procedure that can be implanted. On the device model, the process of force restarting your iPhone will depend. To force restart the various iPhone models, follow the given guide:
Steps to Force Restart iPhone
iPhone SE (2nd Generation), iPhone 8, or iPhone 8 Plus later:
Step 1: At first you have to press and release the Volume Up button quickly.
Step 2: Again follow the same process with the Volume Down button also.
Step 3: Until the Apple Logo appears on the screen, press and hold the Side button.
Steps to Force Restart iPhone 7 and iPhone 7 Plus:
Step 1: At the same time, press and hold the Volume Down and the Sleep/Wake button.
Step 2: When you see the Apple Logo on the screen, release both buttons.
Steps to Force Restart Phone 6s, iPhone 6s Plus or iPhone SE (1st Generation):
Step 1: At the same time, press and hold the Home button and the Sleep/Wake button.
Step 2: Then let go of the buttons after the Apple Logo appears.
Pros:
- You don’t have to pay a single penny because it is free.
- To return your device to a normal state, the process only takes a few seconds.
- The process will just reboot your device, it won’t wipe your data.
Cons:
- Often to fix some problems, a force restart is not enough.
- Sometimes it may fix the problems but it only lasts for a while.
Use iTunes to Fix iPhone Stuck in Boot Loop (Data Loss):
If you ever face iPhone stuck in boot loop issue, you can rely on iTunes to restore your iPhone to break the boot loop status. To get your device out of boot loop status, follow the below-given methods:
Method 1: Put your iPhone into Recovery Mode
Steps to Enter iPhone Recovery Mode (https://itoolab.com/guide/enter-iphone-recovery-mode/)
Step 1: First of all, connect your iPhone with iTunes on your PC.
Step 2: Follow these steps after connecting:
- For iPhone 8 or later version
Press and release the button for volume up. Again follow the same process for volume down. Then, till recovery mode appears, long-press the Side button.
- For iPhone 7, iPhone 7 Plus and iPod touch (7th Generation)
Until recovery mode appears, long-press the Top button and button for volume down once.
Step 3: Click “Restore” after having entered recovery mode.
Method 2: Put your iPhone into DFU mode
As it is risky and more technical to use, try this method only when the above method doesn’t work. Steps to Put your iPhone into DFU mode
Step 1: Connect your iPhone with iTunes after launching it on your PC.
Step 2: Then enter the DFU mode by following these steps:
- iPhone 6S
While pressing the Home button, long-press the Sleep button also for like 8 seconds. After that only release the Sleep button, not the Home button. Until your iPhone is recognized by the computer, keep pressing the Home button.
- For iPhone 7 and iPhone 7 Plus
While pressing the volume down button, long-press the Side button for like 8 seconds. After that release the Side button only. Until your iPhone is recognized by the computer, keep pressing the volume down button.
- For iPhone 8 or later version
You have to press the button for volume up and then release. For the button for volume down, do the same thing. After that long-press the side button of your iPhone. Long-press the down volume button once you see a black screen. While holding the volume down button, long-press these buttons but release the Side buttons after 5 seconds. Follow the displayed on-screen instructions.
Step 3: Click “OK” after selecting “Restore” in iTunes.
Step 4: Then tap on “Restore iPhone”.
Pros:
- Using iTunes to fix iPhone stuck on the boot loop is free.
- If you have created a backup of all your files, these methods will be useful to you.
Cons:
- If you don’t have a backup, these two methods will wipe all of your data and settings.
- To restore, iTunes takes time, and also it is very user-unfriendly.
Conclusion:
You may need to take it to your local Apple store for repair if you still have a restart loop on your iPhone after trying all the above operations. We would highly recommend you use iToolab FixGo to fix your iPhone stuck in boot loop. It can be a really helpful tool to save your money and time at the local Apple store. Like an expert, you can fix any iOS issue easily in a few minutes. This tool is one of the best programs to fix any issue on iOS devices.
Follow Techdee for more!